Franklin, MA · Norfolk County
HVAC & Heat Pump Installation in Franklin, MA
Cold-climate heat pumps, ductless mini-splits and efficient heating and cooling for Franklin, planned with BCI Group and installed with 1A Home Energy.
Local experts
Efficient heating and cooling in Franklin
Modern cold-climate heat pumps keep homes warm through New England winters and also provide efficient air conditioning in summer. Ductless and ducted options fit most Franklin homes.
Older homes with radiators or baseboard heat often switch to ductless heat pumps, which avoid opening walls for new ductwork.
Franklin is about 18 miles from our Westborough, MA headquarters, and our crews work across Norfolk County every week.
- Mass Save® rebates where eligible
- Right-sized with a load calculation
- Installed with 1A Home Energy
- Cold-climate heat pump options
Applications
HVAC upgrades for Franklin homes
These are the heating and cooling upgrades Franklin homeowners ask about most.
Cold-climate outdoor units
Outdoor units rated to heat in New England winters.
Multi-zone systems
One outdoor unit serving several rooms or floors.
Central air replacement
Efficient cooling with heating built in.Local homes
Know your Franklin home
Franklin has older homes around its historic downtown and many newer subdivisions built from the 1980s through the 2000s.
Franklin's homes spread from its historic downtown and Dean College to newer neighborhoods along I-495 and Route 140, with Unionville and Franklin State Forest on the edges of town. Many homes built since the 1980s have bonus rooms over garages that run cold in winter and hot in summer.
Norfolk County stretches from coastal cities like Quincy to suburbs along I-95 and I-495, with housing that ranges from historic homes to newer subdivisions.
Franklin at a glance
- Region
- the I-495 corridor
- County
- Norfolk County
- Climate zone
- 5A
- From our Westborough office
- About 18 miles
- Efficiency program
- Mass Save®
Recommended plan
Our heat pump plan for a typical older home in Franklin
Tighten the house
Sealing and insulating reduce the heat the system must supply.
Go ductless
Mini-splits avoid running ducts through old walls.
Keep a backup
Some homes keep the existing boiler for the coldest days.
Right-size it
The load calculation reflects the upgraded home.
Newer homes with existing ductwork are often good candidates for ducted heat pumps that reuse the duct system.
Climate, code & rebates
Insulation targets and incentives in Franklin
Climate & code
Climate zone 5A targets
Franklin is in IECC climate zone 5A. For attics in zones 5 and 6, ENERGY STAR recommends R-49 to R-60, and many existing homes here have far less. New construction and major renovations in Massachusetts follow the state energy code, and many towns have adopted the stricter Stretch or Specialized codes.
Incentives
Mass Save® in Massachusetts
Massachusetts homeowners can start with a no-cost Mass Save® Home Energy Assessment, which can lead to incentives for insulation and air sealing. As a Mass Save® partner, BCI Group helps you through the program steps.
About Mass Save® →How it works
From consultation to comfort in Franklin
- 01
Call
Tell us about your home and current heating.
- 02
Visit
We review the house and its needs.
- 03
Plan
You get a coordinated plan and quote.
- 04
Comfort
The system is installed and set up.
Pricing
How heat pump projects are priced in Franklin
Rebates and financing can lower the net cost. We review what may apply to your home.
- System type and capacity
- Electrical upgrades needed
- Number of zones or indoor units
- Keeping or removing the old system
- Ductless or ducted design
Our work
Heat pump projects near Franklin
FAQ
HVAC & Heat Pumps questions in Franklin, MA
Can a heat pump replace oil heat?
In many homes, yes, especially after insulation and air sealing.
Are heat pumps noisy?
Modern units are quiet indoors and outdoors.
Do heat pumps provide air conditioning?
Yes. The same system heats in winter and cools in summer.
Do heat pumps work in Franklin winters?
Yes. Cold-climate heat pumps are designed to heat efficiently in New England winters.
How long does installation take?
Most mini-split installs take one to three days, depending on the number of zones.
Who installs the system?
BCI Group coordinates HVAC projects with our partner 1A Home Energy, which handles installation.
How soon can you start a heat pump project in Franklin?
Our crews travel about 18 miles from Westborough, MA to Franklin, and we group estimates and jobs by area. You'll get a start date with your written quote.
Do you also work in towns near Franklin?
Yes. Besides Franklin, we serve nearby communities such as Milford, Holliston and Upton, along with the rest of Norfolk County.
Nearby
More from BCI Group in Norfolk County and beyond
Free estimate · No commitment
Stop overpaying for energy.
Fill out the form or reach us directly — we respond within one business day.
10+ Years
Serving New England
HERS Certified
In-house ratings
Mass Save®
Rebates handled
5 States
MA · NH · RI · CT · ME